info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Concrete floor

We recommend one of the Motor-Movers below for your motorcycle:


Display:


Loading...
Motor-Mover Big-Bike

Quick view

Order

(21)
In stock
Motor-Mover Big-Bike

Motor-Mover Big-Bike

(21)
€ 139,95

It is very simple. You roll the Mover as far back as possible against the front of the rear tire (a recess has been specially made in the Mover). Jack up the centerstand on the rubber anti-slip plates on the Mover and move.

Extremely strong 8mm steel construction with double 75mm castors including swivel and wheel brake. The one and only professional "EASY-PARKING SYSTEM" has been developed and extensively tested since 1994. Platform width for the centerstand is 45cm.

The original Big-Bike Mover is suitable for motorcycles with a centerstand. Especially for the larger motorcycles and for example tile floors.

Castors with a diameter of 75mm roll over floors with joints more easily than the smaller 50mm wheels.
Centerstand with a maximum width of 45cm (measured externally) fits easily on the 8 mm steel platform. Plateau is finished with strong rubber anti-slip plates to prevent slipping when moving.

The double castors (2 castors p / castor) have a robust fine rolling property for rolling over all types of floors such as tile floors.
The tip of the shoe allows you to brake the casters to prevent rolling away.

The Big-Bike Mover contains German quality swivel wheels with rubber tread. The ball-bearing slewing ring ensures, among other things, a smooth and SAFE movement of your precious motorcycle.


Specifications

 
Article number 100048
Weight 11,6 kg
Dimensions (lxwxh) 46 x 45 x 11 cm
Width plateau 450 mm
Caster wheel diameter 75 mm
max. carrying capacity 295 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: voor bepaalde Chopper modellen is het raadzaam om advies op te vragen, alvorens u een bestelling wilt plaatsen.

Motor-Mover Rear Wheel | for "oldtimer" motorcycles

Quick view

Order

(1)
In stock
Motor-Mover Rear Wheel | for "oldtimer" motorcycles

Motor-Mover Rear Wheel | for "oldtimer" motorcycles

(1)
€ 179,00

Note: this Motor-Mover is only valid for motorcycles with a rear tire from 90mm.

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover  (the demo video shows how the Motor-Mover  functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System. It has been developed and extensively tested and is best tested in "MOTORRAD" (German motorcycle magazine).

 

Specifications

 
Article number 100045a
Weight 9,9 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Back width 650 mm
Motorcycle rear tire width 90-160 mm
Caster wheel diameter 75 mm
max. carrying capacity 190 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.

Motor-Mover Rear Wheel

Quick view

Order

(49)
In stock
Motor-Mover Rear Wheel

Motor-Mover Rear Wheel

(49)
€ 189,00

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover  (the demo video shows how the Motor-Mover  functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System. It has been developed and extensively tested and is best tested in "MOTORRAD" (German motorcycle magazine).

 

Specifications

 
Article number 100045a
Weight 9,9 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Back width 650 mm
Motorcycle rear tire width 120-210 mm
Caster wheel diameter 75 mm
max. carrying capacity 275 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.

Motor-Mover Rear Wheel | Motorscooter

Quick view

Order

(0)
In stock
Motor-Mover Rear Wheel | Motorscooter

Motor-Mover Rear Wheel | Motorscooter

(0)
€ 189,00

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover  (the demo video shows how the Motor-Mover  functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System. It has been developed and extensively tested and is best tested in "MOTORRAD" (German motorcycle magazine).

 

Specifications

 
Article number 100045
Weight 9,9 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Back width 650 mm
Motorcycle rear tire width 120-210 mm
Caster wheel diameter 75 mm
max. carrying capacity 300 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.

Motor-Mover XXL | Motor scooter Demo model
-20%

Quick view

Order

(0)
In stock
Motor-Mover XXL | Motor scooter Demo model

Motor-Mover XXL | Motor scooter Demo model

(0)
€ 249,00 € 199,00

The strongest Motor-Mover, applicable for all motorcycles with a wide or narrow center stand.

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily place the Motor-Mover under your motorcycle and set your centerstand on the Motor-Mover  (the demo video shows how the Motor-Mover functions).

The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System.

 

Specifications

 
Article number 100235
Weight 14,5 kg
Dimensions (lxwxh) 82 x 35 cm
Width plateau 52 x 11 cm
Caster wheel diameter 75 mm
max. carrying capacity 480 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years

Motor-Mover Rear wheel "Luxury" double wheels

Quick view

Order

(10)
In stock
Motor-Mover Rear wheel "Luxury" double wheels

Motor-Mover Rear wheel "Luxury" double wheels

(10)
€ 209,00

The "De Luxe" version is identical to the standard version (article number 100045a). The only difference is that this version comes with double castor wheels. The advantage of the double wheels is that the Motor-Mover can move more easily over uneven floors. This is therefore intended for use in firebreaks and uneven floors. The dual wheels can also be purchased later on the Accessories page.

The Motor-Mover is the ideal device to move your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover (the demo video shows how the Motor-Mover functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

 

Specifications

 
Article number 100050
Weight 10,5 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Motorcycle rear tire width 120-210 mm
Caster wheel diameter 75 mm double swivel castors slide bearing
max. carrying capacity 285 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.


 
 

Motor-Mover Achterwiel "kogelgelagerde wielen | voor "oldtimer" motorfietsen

Quick view

Order

Motor-Mover Achterwiel "kogelgelagerde wielen | voor "oldtimer" motorfietsen

Motor-Mover Achterwiel "kogelgelagerde wielen | voor "oldtimer" motorfietsen

(1)
€ 209,00

Note: this Motor-Mover is only valid for motorcycles with a rear tire from 90mm.

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover  (the demo video shows how the Motor-Mover  functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System. It has been developed and extensively tested and is best tested in "MOTORRAD" (German motorcycle magazine).

 

Specifications

 
Article number 100045a
Weight 9,9 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Back width 650 mm
Motorcycle rear tire width 90-160 mm
Caster wheel diameter 75 mm
max. carrying capacity 190 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.

Motor-Mover Rear Wheel | Ready to use

Quick view

Order

(0)
In stock
Motor-Mover Rear Wheel | Ready to use

Motor-Mover Rear Wheel | Ready to use

(0)
€ 229,00

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily drive your motorcycle in the Motor-Mover and also out of the Motor-Mover  (the demo video shows how the Motor-Mover  functions).

The Motor-Mover can be used on 99% of motorcycles, with or without a side stand or center stand. The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System. It has been developed and extensively tested and is best tested in "MOTORRAD" (German motorcycle magazine).

 

Specifications

 
Article number 100045a
Weight 9,9 kg
Dimensions (lxwxh) 48 x 61 x 40 cm
Back width 650 mm
Motorcycle rear tire width 120-210 mm
Caster wheel diameter 75 mm
max. carrying capacity 345 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years


Note: for certain Chopper models it is advisable to ask for advice before placing an order.

Motor-Mover XXL

Quick view

Order

Motor-Mover XXL

€ 249,00
(3)
In stock
Motor-Mover XXL

Motor-Mover XXL

(3)
€ 249,00

The strongest Motor-Mover, applicable for all motorcycles with a wide or narrow center stand.

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily place the Motor-Mover under your motorcycle and set your centerstand on the Motor-Mover  (the demo video shows how the Motor-Mover functions).

The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System.

 

Specifications

 
Article number 100235
Weight 14,5 kg
Dimensions (lxwxh) 82 x 35 cm
Width plateau 52 x 11 cm
Caster wheel diameter 75 mm
max. carrying capacity 480 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years

Motor-Mover XXL | motorscooter

Quick view

Order

(0)
In stock
Motor-Mover XXL | motorscooter

Motor-Mover XXL | motorscooter

(0)
€ 249,00

The strongest Motor-Mover, applicable for all motorcycles with a wide or narrow center stand.

The Motor-Mover is the ideal device for moving your motorcycle in any confined space. Ideal for your firebreak, storage room, garage or shed. Because the Motor-Mover is made of a stable compact steel construction, you can easily place the Motor-Mover under your motorcycle and set your centerstand on the Motor-Mover  (the demo video shows how the Motor-Mover functions).

The motorcycle stands upright in the Motor-Mover, so that your motorcycle can, for example, be stored tightly against the wall or can be cleaned easily.

The Original Motor-Mover; the only truly professional Easy-Parking System.

 

Specifications

 
Article number 100235
Weight 14,5 kg
Dimensions (lxwxh) 82 x 35 cm
Width plateau 52 x 11 cm
Caster wheel diameter 75 mm
max. carrying capacity 480 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years

Motor-Mover Rear Wheel "Heavy" (max. tire 305mm)

Quick view

(3)
Out of Stock
Motor-Mover Rear Wheel "Heavy" (max. tire 305mm)

Motor-Mover Rear Wheel "Heavy" (max. tire 305mm)

(3)
€ 269,00

The "Heavy" version is almost identical to item (100045) the standard rear wheel Mover. Specially designed for Chopper models from small to the very heaviest such as Kawasaki Vulcan 1600 is no problem.
The biggest differences are the extra weighted Mover parts. The rear of the Mover has been lowered to 34.5 cm (measured from the floor) to make room for number plate & mudguard. This "Heavy model" has 460 kg carrying capacity and therefore the Motor-Mover can be set for tires 150 - 305 mmBall-bearing swivel wheels double instead of 1 swivel wheel, for more load-bearing capacity and lighter rolling.

How does this Mover work?
See also demo film. Drive the motorcycle backwards in the Original Motor-Mover over the metal plate between the two red supports. The bike is now stable and the rear tire is clear of the floor, ready for storage. Driving out of the Motor-Mover is exactly the other way around, you press the gray pedal with your right foot at the front and push the motor forward.

  • Heavier Parts + Construction
  • Ball-bearing swivel wheels double instead of 1 swivel wheel, for more load-bearing capacity and lighter rolling.
  • A lowered Mover at the rear 34.5cm measured from the floor, taking into account the mudguard & license plate
  • Space saving in your garage / storage room + workshop, can be stored close to the wall
  • 2 year manufacturer's warranty on complete product. We are not difficult about it.


TIP: Increased space between license plate / rear fender when driving "on" the Mover!

 

Specifications

 
Article number 100070
Weight 16,2 kg
Dimensions (lxwxh) (lxbxh) 48 x 61 x 34 cm
Motorcycle rear tire width 150-305 mm
Caster wheel diameter 75 mm
max. carrying capacity 335 kg
Rotation angle 360 degrees
Exploded view Yes
Instruction manual (in various languages) Yes
Warranty 2 years

Note: Before placing an order, we recommend that you contact us by email or phone. We are happy to check certain Chopper models with you for ground clearance.
 
 


Whatsapp logo

© Zonneveld Products | Terms & Conditions